Guides

Contents

Introduction

Installation

Guides

Troubleshooting

Migration

Printing

This guide shows how to work with the Printing API.

Overview

The web page can be printed using the following ways:

The window.print() JavaScript function. It can be invoked from the JavaScript code on a web page.
The IFrame.Print() method of the DotNetBrowser API. It requests printing of the frame. If you need to print the whole page, call the Print() method in the main frame. See the code sample below:

      browser.MainFrame?.Print();

    

      If browser.MainFrame IsNot Nothing Then
    browser.MainFrame.Print()
End If

    

The web page is not printed immediately. The RequestPrintHandler will be invoked to tell the engine how to handle the print request. By default, all print requests are canceled.

Configure printing

There are three handlers that can be used to configure printing:

RequestPrintHandler is used to determine how to handle the print requests. This handler can be used to cancel printing completely, show print preview, or tell the browser to print the content programmatically.
PrintHtmlContentHandler is used to configure how to print the HTML content programmatically.
PrintPdfContentHandler is used to configure how to print the PDF content programmatically.

Cancel printing

To cancel any print request or disable printing at all, register the RequestPrintHandler as shown in the code sample below:

      browser.RequestPrintHandler =
    new Handler<RequestPrintParameters, RequestPrintResponse>(p =>
    {
        return RequestPrintResponse.Cancel();
    });

    

      browser.RequestPrintHandler = 
    New Handler(Of RequestPrintParameters, RequestPrintResponse)(Function(p)
        Return RequestPrintResponse.Cancel()
    End Function)

    

Print preview

To allow the print request and display the Print Preview dialog, use the code sample below:

      browser.RequestPrintHandler =
    new Handler<RequestPrintParameters, RequestPrintResponse>(p =>
    {
        return RequestPrintResponse.ShowPrintPreview();
    });

    

      browser.RequestPrintHandler = 
    New Handler(Of RequestPrintParameters, RequestPrintResponse)(Function(p)
        Return RequestPrintResponse.ShowPrintPreview()
    End Function)

    

In the Print Preview dialog, you can select the preferred printing options:

Print Preview

The Print Preview dialog can also be used to print the content to PDF. In the dialog, you need to click the Change… button in the Destination section, and select Save as PDF. The web page will be saved after pressing the Save button.

Print preview events

To get notified when the Print Preview dialog has been opened or closed, use PrintPreviewOpened and PrintPreviewClosed events:

      Browser.PrintPreviewOpened += (sender, args) =>
{
    // The Print Preview dialog is opened.
};

Browser.PrintPreviewClosed += (sender, args) =>
{
    // The Print Preview dialog is closed.
};

    

      AddHandler Browser.PrintPreviewOpened, Sub(sender, args)
	' The Print Preview dialog is opened.
End Sub

AddHandler Browser.PrintPreviewClosed, Sub(sender, args)
	' The Print Preview dialog is closed.
End Sub

    

Print the content programmatically

To print the content programmatically and configure the print settings without showing any dialogs, you need to use several handlers.

First of all, you need to register the RequestPrintHandler as shown in the code sample below:

      browser.RequestPrintHandler =
    new Handler<RequestPrintParameters, RequestPrintResponse>(p =>
    {
        return RequestPrintResponse.Print();
    });

    

      browser.RequestPrintHandler = 
    New Handler(Of RequestPrintParameters, RequestPrintResponse)(Function(p)
        Return RequestPrintResponse.Print()
    End Function)

    

When Chromium is told to perform printing programmatically, it will use either PrintHtmlContentHandler or PrintPdfContentHandler to determine how the content should be printed.

The handler that will be invoked depends on the current content loaded into the browser - the PrintHtmlContentHandler will be used for regular web pages, and the PrintPdfContentHandler will be used for printing the PDF files.

Choose a printer

The parameters for PrintHtmlContentHandler and PrintPdfContentHandler contain the Printers property - a set of the printers that is currently available for printing. For example, here is how to obtain the printer you need in the PrintHtmlContentHandler implementation:

      browser.PrintHtmlContentHandler 
    = new Handler<PrintHtmlContentParameters, PrintHtmlContentResponse>(p =>
    {
        // Get the collection of the available printers.
        var printers = p.Printers;

        // Get the default printer in the environment.
        var defaultPrinter = printers.Default;

        // Get the built-in PDF printer.
        var pdfPrinter = printers.Pdf;

        // Find a printer by its device name.
        var xpsPrinter = printers.FirstOrDefault(pr => pr.DeviceName.Contains("XPS"));

        // Print the content using the particular printer.
        return PrintHtmlContentResponse.Print(xpsPrinter);
    });

    

      browser.PrintHtmlContentHandler = 
    New Handler(Of PrintHtmlContentParameters, PrintHtmlContentResponse)(Function(p)
        ' Get the collection of the available printers.
        Dim printers = p.Printers

        ' Get the default printer in the environment.
        Dim defaultPrinter = printers.Default

        ' Get the built-in PDF printer.
        Dim pdfPrinter = printers.Pdf

        ' Find a printer by its device name.
        Dim xpsPrinter = 
            printers.FirstOrDefault(Function(pr) pr.DeviceName.Contains("XPS"))

        ' Print the content using the particular printer.
        Return PrintHtmlContentResponse.Print(xpsPrinter)
    End Function)

    

The Print() response in the handlers is used to specify which printer to use for printing.

Each printer has its own capabilities, which include the paper sizes, color models and duplex modes supported by the particular printer. For instance, here is how to check if the printer supports A4:

      bool a4Supported = xpsPrinter.Capabilities.PaperSizes.Contains(PaperSize.IsoA4);

    

      Dim a4Supported As Boolean = xpsPrinter.Capabilities.PaperSizes.Contains(PaperSize.IsoA4)

    

Configure print settings

Each printer contains a PrintJob that represents the current printing operation. The print settings for the particular printing operation are available as a part of the print job. Here is how to customize and apply the print settings:

      pdfPrinter.PrintJob.Settings.Apply((s) =>
{
    s.Orientation = Orientation.Landscape;
    s.PageRanges = new[] { new PageRange(2, 5) };
    s.PaperSize = PaperSize.IsoA4;
    s.PdfFilePath = pdfFilePath;
    // Other settings.
});

    

      pdfPrinter.PrintJob.Settings.Apply(Sub(s)
    s.Orientation = Orientation.Landscape
    s.PageRanges = { New PageRange(2, 5) }
    s.PaperSize = PaperSize.IsoA4
    s.PdfFilePath = pdfFilePath
    ' Other settings.
End Sub)

    

During applying the print settings, the page layout is performed, and the print preview document that will be later sent to the printer is regenerated. As a result, the Apply() call may take some time to execute.

If the settings applied by the handler implementation do not match the printer capabilities, an exception will be thrown.

It is required to specify the fully qualified path via PdfFilePath when the built-in PDF printer is used for printing. If the path is not set, the printing operation will be canceled.

PageCountUpdated event

After the page layout is done, the PageCountUpdated event is raised, providing the resulting page count. Here is how to subscribe to this event for the particular printer:

      printer.PrintJob.PageCountUpdated += (s, e) => 
{
    int newPageCount = e.PageCount;
};

    

      AddHandler printer.PrintJob.PageCountUpdated, Sub(s, e)
    Dim newPageCount As Integer = e.PageCount
End Sub

    

PrintCompleted event

After the printer is selected for printing via PrintHtmlContentResponse.Print() or PrintPdfContentResponse.Print(), the PrintCompleted event is raised for its print job as soon as the printing operation is completed. Here is how to subscribe to this event:

      printer.PrintJob.PrintCompleted += (s, e) => 
{
    var printJob = e.PrintJob;
    bool completed = e.IsCompletedSuccessfully;
};

    

      AddHandler printer.PrintJob.PrintCompleted, Sub(s, e)
    Dim printJob = e.PrintJob
    Dim completed As Boolean = e.IsCompletedSuccessfully
End Sub

    

Print web page to PDF programmatically

Here is the code snippet that demonstrates the general approach to print the web page to PDF programmatically:

      // Resize browser to the required dimension.
browser.Size = new Size(1024, 768);

// Load the required web page and wait until it is loaded completely.
Console.WriteLine($"Loading {url}");
browser.Navigation.LoadUrl(url).Wait();


// Configure print handlers.
browser.RequestPrintHandler =
    new Handler<RequestPrintParameters, RequestPrintResponse
    >(p => RequestPrintResponse.Print());

TaskCompletionSource<string> printCompletedTcs =
    new TaskCompletionSource<string>();
browser.PrintHtmlContentHandler
    = new Handler<PrintHtmlContentParameters, PrintHtmlContentResponse
    >(p =>
    {
        try
        {
            // Get the print job for the built-in PDF printer.
            PdfPrinter<PdfPrinter.IHtmlSettings> pdfPrinter =
                p.Printers.Pdf;
            IPrintJob<PdfPrinter.IHtmlSettings> printJob =
                pdfPrinter.PrintJob;

            // Apply the necessary print settings.
            printJob.Settings.Apply(s =>
            {
                IReadOnlyCollection<PaperSize> paperSizes =
                    pdfPrinter.Capabilities.PaperSizes;
                s.PaperSize =
                    paperSizes.First(size => size.Name.Contains("A4"));

                s.PrintingHeaderFooterEnabled = true;
                // Specify the path to save the result.
                s.PdfFilePath = pdfFilePath;
            });

            string browserUrl = p.Browser.Url;
            printJob.PrintCompleted += (sender, args) =>
            {
                // Set the task result when the printing is completed.
                printCompletedTcs.TrySetResult(browserUrl);
            };

            // Tell Chromium to use the built-in PDF printer
            // for printing.
            return PrintHtmlContentResponse.Print(pdfPrinter);
        }
        catch (Exception e)
        {
            printCompletedTcs.TrySetException(e);
            throw;
        }
    });

// Initiate printing and wait until it is completed.
Console.WriteLine("URL loaded. Initiate printing");
browser.MainFrame.Print();
string printedUrl = printCompletedTcs.Task.Result;
Console.WriteLine($"Printing completed for the URL: {printedUrl}");

    

      ' Resize browser to the required dimension.
browser.Size = New Size(1024, 768)

' Load the required web page and wait until it is loaded completely.
Console.WriteLine($"Loading {url}")
browser.Navigation.LoadUrl(url).Wait()

' Configure print handlers.
browser.RequestPrintHandler =
    New Handler(Of RequestPrintParameters, RequestPrintResponse )(
        Function(p) RequestPrintResponse.Print())

Dim printCompletedTcs As New TaskCompletionSource(Of String)()
browser.PrintHtmlContentHandler =
    New Handler(Of PrintHtmlContentParameters, PrintHtmlContentResponse )(
        Function(p)
            Try
                ' Get the print job for the built-in PDF printer.
                Dim pdfPrinter As PdfPrinter(Of PdfPrinter.IHtmlSettings) =
                        p.Printers.Pdf
                Dim printJob As IPrintJob(Of PdfPrinter.IHtmlSettings) =
                        pdfPrinter.PrintJob

                ' Apply the necessary print settings.
                printJob.Settings.Apply(Sub(s)
                    Dim paperSizes As IReadOnlyCollection(Of PaperSize) =
                            pdfPrinter.Capabilities.PaperSizes
                    s.PaperSize = 
                        paperSizes.First(
                            Function(size) size.Name.Contains("A4"))

                    s.PrintingHeaderFooterEnabled = True
                    ' Specify the path to save the result.
                    s.PdfFilePath = pdfFilePath
                End Sub)

                Dim browserUrl As String = p.Browser.Url
                AddHandler printJob.PrintCompleted, Sub(sender, args)
                    ' Set the task result when the printing is completed.
                    printCompletedTcs.TrySetResult(browserUrl)
                End Sub

                ' Tell Chromium to use the built-in PDF printer
                ' for printing.
                Return PrintHtmlContentResponse.Print(pdfPrinter)
            Catch e As Exception
                printCompletedTcs.TrySetException(e)
                Throw
            End Try
        End Function)

' Initiate printing and wait until it is completed.
Console.WriteLine("URL loaded. Initiate printing")
browser.MainFrame.Print()
Dim printedUrl As String = printCompletedTcs.Task.Result
Console.WriteLine($"Printing completed for the URL: {printedUrl}")

    

Go Top